Configure a BENDRYX Press Brake

Step 1 of 5

What do you need to bend?

Choose the closest description and provide the dimensions you already know. Calculate air-bending force first →

Primary type of work

Small precision partsBrackets, enclosures and electrical components Mixed daily fabricationChanging materials, thicknesses and part sizes Repeat productionHigher utilization and shorter cycle priorities Long componentsPoles, rails, trailers and architectural profiles Heavy plateInfrastructure, energy and engineered forming Compact up-acting workSmaller-format general fabrication

Material Maximum thicknessMillimetres Longest bendMillimetres Required tonnage, if knownMetric tons Smallest return flangeMillimetres Required inside radiusMillimetres

Step 2 of 5

How will the machine be used?

Production patterns help determine the most practical drive, gauging and automation level.

Approximate bends per day Typical batch pattern

Most important production priority

VersatilityHandle the broadest practical part mix ThroughputReduce cycle and setup time Long-bend consistencyControl straightness and deflection Clean electric operationAvoid hydraulic oil in the bending drive

Anything unusual about the work?

Step 3 of 5

Choose a configuration level.

Start with a practical package. Every component can still be adjusted during application review.

EssentialReliable core capabilityESA CNC, standard gauging, manual clamping and required safeguarding. Most popularProductionFour-axis gauging, CNC crowning, hydraulic clamping and offline preparation. AdvancedComplex-part capabilitySix-axis gauging, angle measurement, premium clamping and support options. EngineeredApplication-specific systemCustom geometry, tandem or heavy-duty design, handling and automation.

Step 4 of 5

Fine-tune the machine.

Selections are recommendations for quotation review, not commitments.

Step 5 of 5

Your starting recommendation.

Use this summary to continue into an engineering review and quotation.

Recommended starting family

View this machine family →

Technical model match

Capacity direction

Package

Controls & positioning

Engineering review still required

Final tonnage depends on material tensile strength, tooling opening, bend method and part geometry. BENDRYX will also confirm stroke, daylight, throat, safety and applicable electrical inspection requirements.

Request pricing for this configuration →

Start with the work. We’ll narrow the machine.

What do you need to bend?

How will the machine be used?

Choose a configuration level.

Fine-tune the machine.

Your starting recommendation.